Ships free when ordering one of 9ft or 12ft Palapa Kits
Our Palapa Umbrella In Ground Mounting Sleeves are ideal for customer that want to mount their palapa umbrella in ground without using one of our steel mounting brackets. This sleeve will give you a cleaner look to your installation. You would concrete 2' in ground and leave 6" out of ground. Once concrete dries put a couple inches of pea gravel in, then slide pole into place.
Now use screws supplied to screw through pvc pipe into wood support post. This will prevent palapa from spinning when windy. Then use silicone to fill in gap at top of PVC pipe so water doesn't get inside. If you like you can add our Manila rope to wrap the PVC pipe to hide white pipe, see image below. Looks great.
* Ships free when shipping with our palapa kits
• 2.6 ft Long.
• 6" inside diameter
• 180 PSI
• Some sanding on wood pole may be required
• Can be spray painted
• Rope option available
• When installing into existing concrete slab, core 12" diameter hole and dig 2' deep. Center PVC pipe 2' down in hole leaving 6" exposed and shim sides with 2"x4" so when pouring quick dry concrete pipe will not move.
• When installing into dirt you would need to dig hole that is 2'DX3'X3'. Center PVC pipe 2' down in hole leaving 6" exposed and shim sides with 2"x4" so when pouring quick dry concrete pipe will not move. These are very top heavy